Xiaomi · Firmware
35 Xiaomi error code 35
Serial number (VIN) error
Widely published – may differ by model/firmware
Note
Table published for Xiaomi/Segway-Ninebot scooters; may differ by model/firmware.
Possible causes
General, component-based causes – not a manufacturer-specific statement.
- Software version mismatch between components
- Failed update / corrupted firmware
- Configuration error (wheel size, component identification)
Safe test steps
- Check component software versions with the manufacturer tool.
- Was there an update or part change before the fault?
Workshop reference values
- No general documented measurement value – manufacturer service documentation required.
Repair approach
- Software update/configuration at a dealer with the manufacturer tool.
Tools needed
- Manufacturer dealer diagnostic tool/software (if available)
Safety
- Do not disconnect the battery during an update.
This information does not replace manufacturer service documentation. Work on batteries and high-voltage parts only with the appropriate expertise.
Related fault codes
10Communication error between dashboard and control board11Abnormal current in motor phase A12Abnormal current in motor phase B13Abnormal current in motor phase C14Throttle fault / not in zero position15Brake lever fault / not in zero position18Motor Hall sensor fault21Battery (BMS) communication fault