Brake cut-off stays active

Possible causes

General, component-based causes – not a manufacturer-specific statement.

• Brake lever does not fully return
• Brake switch/magnet misaligned or faulty
• Brake switch cable damaged

Safe test steps

• Lever return, magnet/sensor position.
• Unplug switches one at a time for diagnosis (reconnect afterwards!).

Workshop reference values

• Brake switches are normally-open, normally-closed or Hall type – measure per the manufacturer diagram.

Repair approach

• Adjust or replace the brake lever/switch.

Tools needed

• Digital multimeter (CAT III, fused inputs)
• Basic hand tools, insulated screwdrivers